Ricoh Aficio MP C3001 Manual Download Page 69

Page: 69 / 94

Page 68 of

FPT_FDI_EXP.1

Restricted forwarding of data to external interfaces

Hierarchical to:

No other components.

Dependencies:

FMT_SMF.1 Specification of Management Functions

FMT_SMR.1 Security roles

FPT_FDI_EXP.1.1

The TSF shall provide the capability to restrict data received on [assignment: the

Operation Panel, LAN, telephone line] from being forwarded without further processing by

the TSF to [assignment: the LAN and telephone line].

6.1.7

Class FTA: TOE access

FTA_SSL.3 TSF-initiated

termination

Hierarchical to:

No other components.

Dependencies: No

dependencies.

FTA_SSL.3.1

The TSF shall terminate an interactive session after a [assignment: elapsed time of auto

logout, completion of document data reception from the printer driver, completion of

document data reception from the fax driver, and termination of communication with RC

Gate].

6.1.8

Class FTP: Trusted path/channels

FTP_ITC.1 Inter-TSF

trusted

channel

Hierarchical to:

No other components.

Dependencies: No

dependencies.

FTP_ITC.1.1

The TSF shall provide a communication channel between itself and another trusted IT product

that is logically distinct from other communication channels and provides assured identification

of its end points and protection of the channel data from modification or disclosure.

FTP_ITC.1.2

The TSF shall permit [selection: the TSF, another trusted IT product] to initiate

communication via the trusted channel.

FTP_ITC.1.3

The TSF shall initiate communication via the trusted channel for [assignment: communication

via the LAN of document data, function data, protected data, and confidential data, and

communication with RC Gate via the LAN].

6.2 Security

Assurance

Requirements

The evaluation assurance level of this TOE is EAL3+ALC_FLR.2. Table 31 lists the assurance components

of the TOE. ALC_FLR.2 was added to the set of components defined in evaluation assurance level 3

(EAL3).

Summary of Contents for Aficio MP C3001






























































































Search results

Summary of Contents for Aficio MP C3001

Reviews:

Related manuals for Aficio MP C3001

Brands by name

Popular brands

Ricoh Aficio MP C3001, Manual

Search results

Summary of Contents for Aficio MP C3001

Reviews:

Related manuals for Aficio MP C3001

Brands by name

Popular brands