Ricoh Aficio MP 6000 Operating Instructions Manual Download Page 878

Page: 878 / 907

Chaptering

115

Inserting chapter slip sheets

Insert chapter slip sheets before the specified page.
• Print

Prints on the chapter slip sheets. When duplex printing is selected, both sides
of the slip sheets are printed on.

• Blank

Note

❒

Up to 100 pages can be specified as the front pages of chapters using the print-
er driver.

❒

The slip sheet should be the same size and orientation as the body of the paper.

❒

If “Auto Tray Select” has been set as the paper feed tray for the body paper,
the paper will be delivered from a tray containing paper in the

orientation.

Therefore, when the cover paper has been set to the

orientation, the orien-

tation of the output cover paper and body paper will be different.

❒

The same paper feed tray cannot be set for the body of the document and the
slip sheet.

❒

For printing methods, see the printer driver Help.

AJO023S

AJO024S

Summary of Contents for Aficio MP 6000












































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands

Ricoh Aficio MP 6000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 6000

Reviews:

Related manuals for Aficio MP 6000

Brands by name

Popular brands