Ricoh Aficio MP 1100 Operating Instructions Manual Download Page 11

Page: 11 / 297

Accessing User Tools (System Settings)

This section is for Administrators in charge of this machine.
User Tools allow you to change or set defaults.

Note

❒

Operations for system settings differ from normal operations. Always quit
User Tools when you have finished.

❒

Any changes you make with User Tools remain in effect even if the main
power switch or operation switch is turned off, or the

{

Energy Saver

}

{

Clear

Modes

}

key is pressed.

Reference

p.4 “Quitting User Tools”

Changing Default Settings

This section describes how to change the settings of User Tools.

Important

❒

If the Administrator Authentications specified, contact your administrator.

Press the

{

User Tools

}

key.

Select the menu.

To change the System Settings, Press

[

System Settings

]

To change the Copier/Document Server Features, Press

[

Copier/Document

Server Features

]

To change the Printer Features, Press

[

Printer Features

]

To change the Scanner Features, Press

[

Scanner Features

]

To adjust colour registration or gradation, press

[

Maintenance

]

To find out who to contact for maintenance and where to order consumables,
press

[

Enquiry

]

Select the menu tab.

Change settings by following instructions on the display, and then press

[

]

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for Aficio MP 1100










































































































































































































































































































Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands

Ricoh Aficio MP 1100, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 1100

Reviews:

Related manuals for Aficio MP 1100

Brands by name

Popular brands