Ricoh Aficio C3000, Operating Instructions Manual, Page: 82 / 292

Transmission
72
1
Using the Address Book to Specify Destinations
When destinations are programmed in a destination list, you can specify a des-
tination by selecting a Destination key from the destination list.
The programmed name appears on Destination key.
Press
[ Fax ] or [ Internet Fax ] to switch the transmission type between fax/IP-Fax
and Internet Fax.
Important
❒
In the destination list, program an individual fax number, IP-Fax destination,
e-mail address and/or groups of destinations.
A
Press [ Fax ] or [ Internet Fax ] to switch the transmission type to fax/IP-Fax or
Internet Fax.
B
Press the title word key where the desired destination is programmed.
For example, if you want to specify “NEW YORK OFFICE” programmed in
“LMN”, press
[ LMN ] .
C
Press the Destination key programmed with the desired destination.
If the desired Destination key is not shown, press [
U
] and [
T
] to look through
the list.
To cancel the selection, press the selected Destination key again. You can also
press the
{
Clear / Stop
}
key to cancel the selection.
To select more destinations, repeat steps
B
and
C
.
The destination is set and the Destination key is highlighted.