Ricoh Aficio C3000 Operating Instructions Manual Download Page 228

Page: 228 / 292

Storing a Document

218

If you have selected

[

Send & Store

]

, specify the receiver.

If you have selected

[

Store Only

]

, proceed to step

Press the

{

Start

}

key.

Note

❒

You can change file names and user names.

Reference

p.32 “Setting the Original Orientation”
“System Settings”, General Settings Guide

Programming a user name

Press

[

User Name

]

Press the user name to be programmed.

Press the title key to switch between titles.
To set a non-programmed user name, press

[

Manual Entry

]

, and then enter the

name. User names entered by pressing

[

Manual Entry

]

are not programmed

into the user code.

Press

[

]

Note

❒

Depending on the security settings,

[

Access Privileges

]

might be displayed

instead of

[

User Name

]

. For details about setting

[

Access Privileges

]

, ask the

administrator.

Summary of Contents for Aficio C3000





































































































































































































































































































Search results

Summary of Contents for Aficio C3000

Reviews:

Ricoh Aficio C3000, Operating Instructions Manual, Page: 228 / 292

Search results

Summary of Contents for Aficio C3000

Reviews: