Ricoh Aficio 1515 Operating Instructions Manual Download Page 62

Page: 62 / 68

Specifications

❖

Combine

• When using this function, the machine selects the reproduction ratio auto-

matically. This reproduction ratio depends on original sizes, if specified, or
copy paper sizes.

• If the calculated ratio is under the minimum ratio, it is automatically ad-

justed to within available range. However, with some ratios, parts of the
image might not be copied.

• You cannot use custom size paper of 357 mm in length, or larger.
• If the orientation of originals is different from that of the copy paper, the

machine will automatically rotate the image by 90

to make copies proper-

ly.

• If the number of originals placed is less than the number specified for com-

bining, the last page segment is left blank as shown.

❖

Duplex Margin

• If you set a binding margin that is too wide, part of the image may not be

copied.

• When making copies using the Combine function, the binding margin is

added to the copies when combining is finished.

StellaC2_GBcopy_F1_pre_FM.book Page 56 Tuesday, December 16, 2003 4:39 PM

Summary of Contents for Aficio 1515





































































Search results

Summary of Contents for Aficio 1515

Reviews:

Ricoh Aficio 1515, Operating Instructions Manual, Page: 62 / 68

Search results

Summary of Contents for Aficio 1515

Reviews: