manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual, Page: 82 / 198

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 82

Transmission

74

1

Search by E-mail Address

Follow these steps to search for a destination registered in the destination list by
e-mail address.

Important

❒

If 

[

LDAP Search

]

 is set to 

[

Off

]

 in Administrator Tools, in the System Settings

menu, the display for selecting either 

[

Search Address Book

]

 or 

[

Search LDAP

]

does not appear.

A

Press 

[

]

 to switch the destination to e-mail address.

B

Press the 

{

Search Destination

}

 key.

C

Select 

[

Search Address Book

]

 using 

{U}

 or 

{T}

, and then press the 

{

OK

}

 key.

D

Select 

[

Search by E-mail Address

]

 using 

{U}

 or 

{T}

, and then press the 

{

OK

}

key.

If 

[

Search by E-mail Address

]

 does not appear, press the 

{

Escape

}

 key to return

to step 

A

, and then switch the destination to e-mail address.

ALT043S

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments