manualshive.com logo in svg

Ricoh Aficio 1027, Facsimile Reference Manual, Page: 65 / 198

Share
Download
Ricoh Aficio 1027 Facsimile Reference Manual Download Page 65

Specifying a Destination

57

1

Note

❒

Destinations programmed in groups can be checked using “Group Desti-
nation List” in “System Settings”.

❒

You do not have to press 

[

Add Dest

]

 when adding a destination using the

Quick Dial keys.

Reference

“System Settings”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide

Specifying a group of destinations using the Quick Dial key

If you program multiple destinations into a Group, you can send documents to
all destinations in that Group using just a few keystrokes. Destinations pro-
grammed in a group are indicated by  .

Important

❒

In the destination list, program an individual fax number, IP-Fax destination,
e-mail address and/or groups of destinations.

❒

Group destination can be used only for Memory Transmission; it cannot be
used for Immediate Transmission. If you specify Immediate Transmission for
a Group destination, the “

Try again after switching to memory trans-

mission.

” message appears. When this happens, press 

[

Exit

]

, and then

switch to Memory Transmission.

❒

The total number of destinations programmed in multiple groups should not
exceed the maximum number of destinations you can specify for one file. For
details, see “Maximum Values”.

A

Press 

[

]

 to switch the destination between fax number, e-mail ad-

dress, and IP-Fax destination.

B

Press the Quick Dial key in which the Group is programmed.

If you make a mistake, press the 

{

Clear/Stop

}

 key and try again.

To select more groups, repeat steps 

A

 and 

B

.

C

Press the 

{

Start

}

 key.

Summary of Contents for Aficio 1027







































































































































































































Reviews:

No comments