Ricoh ADF DF7010, Field Service Manual

Page: 34 / 72

32
Chapter 3 2 ADF Section
3. Remove the four screws to remove the turn
guide.
5. Disconnect the connector.
Remove the ADF document jam sensor.
Screw
Screw
Screw
Screw
Turn guide
4. Remove the screw, together with the bracket.
Screw
ADF document
jam sensor
Sensor
Connector Bracket
(5) Removing the ADF Feed Roller
1. Remove the ADF feed shaft assy.
→See (3) above
2. Remove the ADF paper separator unit.
ADF paper separator unit
(6) Removing the ADF Document Jam Sensor
1. Remove the ADF feed shaft assy.
→See (3) above
2. Remove the two screws to remove the ADF
feed inlet.
Screw
Screw
ADF feed inlet
Reinstallation
IMPORTANT
● After reinstalling the ADF paper separator
unit, adjust its clearance.
→See Page 41