Ricoh ADF DF7010, Field Service Manual

Page: 30 / 72

28
Chapter 3 1 Exterior
(5) Removing the ADF Unit
1. Remove the ADF.
→See (2) above
2. Remove the ADF document cover.
→See (4) above
ADF Unit
Screw
Screw
Screw
Screw
3. Disconnect the three connectors.
4. Remove the two lock-type cable clamps and
take out the cable units from the three cable
clamps.
5. Remove the six screws to remove the ADF unit.
Connector
Lock-type cable clamp
Cable clamp
(6) Removing the ADF Document Cover Open/Close Switch
1. Remove the ADF document cover.
→See (4) above
3. Remove the two connectors of the ADF document
cover close switch and one connector of the ADF
document cover close switch 2.
Screws
ADF document cover
open/close switch assy
Non-operator’s side
2. Remove the two screws to remove the ADF
document cover open/close switch assy.
Connector
Non-operator’s side Connectors