Ricoh ADF DF7010, Field Service Manual

Page: 10 / 72

8
Chapter 1 1 Specifications
1 Specifications
Model name ADF DF7010
Document feed Automatic feed
Document type Sheets*1
Document weight 64–128 gsm
Document size MAX. : 297×432 mm
MIN. : 100×148 mm
ADF Capacity 100 sheets (64 gsm), 85 sheets (80 gsm/20 lb Bond)
Document set Document face up (printing side up)
Document set orientation Document size (A4, B5, A5): portrait placement, landscape
placement
Document size (A3, B4): portrait placement only
Document processing mode
One-sided document → one-sided master making
2IN1 layout
Power supply Supplied from printer 5 VDC, 24 VDC
Weight 8Kg
Dimension 563(W) x 459(D) x 203(H)mm
Operating temperature 10–35 degrees (C) (50–95 degrees (F))
Specifications are subject to change without prior notice due to continual improvements.
*1 The following types of document cannot be used :
• Documents with large file-binding holes
• Documents with staples or paper clips attached
• Documents with markedly curling ends/sides, or marked folds
• Documents with tears or rough edge
• Chemically treated documents with such as thermal paper and carbon paper, etc.
• Highly transparent documents such as OHP film and tracing paper, etc.
• Documents which surface is slippery such as art paper and coated paper, etc.
• Documents with correction fluid and glue, etc.
• Documents with smaller pieces of glued paper
Always use documents of the same size. If you load documents in different length, the
printer may not operate correctly.