Ricoh 161, Function Manual

Page: 144 / 192

Changing/Confirming Communication Information
136
4
Communication Result Report (Memory Transmission)
This report is printed when a Memory Transmission is completed, so you can
check the result of the transmission.
Note
❒
If two or more destinations are specified, this report is printed after the fax
document is sent to all the destinations.
❒
If the machine is set up not to print this report and the fax document could
not be successfully transmitted, a Communication Failure Report is printed.
❒
You can turn this function on or off with the User Parameters (switch 03, bit 0)
in the Fax Features menu.
❒
You can set whether or not to display a sender name with the User Parame-
ters (switch 04, bit 5) in the Fax Features menu.
❒
You can select whether to include part of the original image on the report with
the User Parameters (switch 04, bit 7) in the Fax Features menu.
❒
To view the report without text disruption, select a font of even character
width in your e-mail application's settings.
❒
You can set whether or not to display a destination with the User Parameters
(switch 04, bit 4) in the Fax Features menu.
❒
The Pg(s) column gives the total number of pages. The Page Not Sent column
gives the number of pages that could not be sent successfully.
❒
“--” indicates that the Internet Fax document was sent to the mail server pro-
grammed in this machine. (However, this does not mean the e-mail was delivered.)
Reference
p.138 “Communication Failure Report”
“Fax Features”, General Settings Guide