Printing
14
2
Manual duplex (two-sided)/ Booklet
2
When you want to print a booklet or do manual duplex printing, use this function.
None
Disable duplex printing.
Duplex (Manual)
When you want to do duplex printing, use this option.
•
Duplex (Manual)
The machine prints all the even-numbered pages first. Then the printer driver will stop and show the
instructions required to re-insert the paper. When you click
OK
the odd-numbered pages will be printed.
When you choose
Duplex (Manual)
, the
Duplex Settings...
button becomes available to select. You can
set the following settings in the
Duplex Settings
dialog box.
•
Duplex Type
There are four types of duplex binding directions available for each orientation.
•
Binding Offset
When you check
Binding Offset
, you can also specify the offset for binding in inches or millimetres.
Booklet (Manual)
Use this option to print a document in booklet format using duplex printing; it will arrange the document
according to the correct page numbers and allows you to fold at the centre of the print output without
having to change the order of the pages.
•
Booklet (Manual)
The machine prints all the even-numbered sides first. Then the printer driver will stop and show the
instructions required to re-insert the paper. When you click
OK
the odd-numbered sides will be printed.
When you choose
Booklet (Manual)
, the
Duplex Settings...
button becomes available to select. You can
set the following settings in the
Duplex Settings
dialog box.
•
Duplex Type
There are two types of duplex binding directions available for each orientation.
•
Booklet Printing Method
When
Divide into Sets
is selected:
This option allows you to print the whole booklet into smaller individual booklet sets, it still allows you
to fold at the center of the smaller individual booklet sets without having to change the order of the
pages. You can specify the number of sheets in each smaller booklet set, from 1 to 15. This option can
help when folding the printed booklet that has a large number of pages.
•
Binding Offset
When you check
Binding Offset
, you can also specify the offset for binding in inches or millimetres.
