Installation of Full Size Paddles for
Thrustmaster Wheel Hubs
This guide will take you step by step through the installation
of your new full size paddles to fit on the GTE, TM28 and
599XX EVO add-on wheel rim hubs.
CAUTION: Be careful to avoid static build-up while handling
the electronics in your wheel. Ricmotech is not responsible
for any damage you may cause to your wheel.
Begin by removing the 2 screws accessible through the
openings in the paddles.
Remove the 3 or 6 screws securing the original wheel to the
hub.
Temporarily remove the D-Pad and grounding spring.
Remove the Quick-Release and unplug the internal cable.
Remove the 4 screws to open the back cover.
Starting with one side first, remove the 4 screws holding the
paddle springs in place.
