background image

6

PROBLEM

POSSIBLE CAUSE

Dust or dirt in field of view.

Dust or dirt on objective, illuminator or 

eyepiece.

Double Image

Interpupillary distance is not set correctly.
Diopter adjustment not set on eyepieces.

Two different eyepieces are being used.

Sample blurs when magnification changes.

Diopter adjustment is not set properly on 

eyepieces.
Specimen is not properly in focus.

Focusing is loose or too tight.

Adjust tension adjustment knob on the side of 

the microscope next to the focusing knob.

TROUBLESHOOTING: Optical

TROUBLESHOOTING: Electrical

PROBLEM

POSSIBLE CAUSE

Lamp does not turn on and light up.

Power cord not plugged in, or batteries are 

not charged.
Light is burned out.

Inadequate brightness.

Rheostat knob needs adjustment.

Lamp blows out immediately.

Incorrect bulb being used.

Lamp flickers.

Connector wires are not secured.

Lamp near end of life.

Lamp not securely plugged into socket.

* Loosening & Tightening focusing tension depends on the microscope stand you have. The BL 

stand adjusts the focus tension by holding both focus knobs (left & right) and while holding 

the left steady, rotating the right knob. The CL microscope stand focus is adjusted similarly by 

holding both knobs and rotating the right knob forward or back to tighten or loosen.

Summary of Contents for S6-BL










Reviews: