2
Thank you for your purchase of a Richter Optica microscope. The information in this manual is
provided to answer most questions that can arise when operating your microscope and to help you
avoid unnecessary maintenance expenses in the future.
Please carefully read instructions before operating microscope. Nomenclature used to describe
components and controls are identified on opposite page.
UNPACKING
Do not discard styrofoam container or packing materials until you are sure shipment is complete
and undamaged (retain styrofoam shipping container to store your microscope when it is not in
use). Remove all tape and packing material used to protect microscope during shipment. Make
certain lens surfaces do not come in contact with dirt, fingerprints or oil. Damage of lens surfaces
occur when they come in contact with such contaminants, and image quality is reduced.
BEFORE USE
When moving the microscope, use both hands and only lay on flat, even surfaces. Damage will
occur by holding the stage, focusing knobs or head when moving the microscope. Hold carrying
handle when moving the microscope.
For safety, make sure the power switch is always turned to the off position “O” before replacing
the bulb or fuse and wait until both the bulb and bulb holder have cooled down.
Replacement bulb: Single 3w LED bulb. Part # U2-001.
SETTING UP THE INSTRUMENT
Avoid placing the instrument in locations exposed to direct sunlight, dust, vibration, high humidity
and where it is difficult to unplug the power supply cord.
MAINTENANCE
1. Wipe lenses only with lens paper.
2. Never disassemble the microscope other than to change the bulb (instructions on page 6).
Disassembling the microscope will affect performance and void warranty.
3. Cover microscope with dust cover provided after each use.