Inspect the power outlet you intend to plug your
Smart Outlet into. If there is any damage
or excessive wear on the outlet, please contact an
electrician.
To reduce any risks of damage please read and understand
any safety and operation instructions included with the sump
pump and other devices you wish to use with your
Smart Outlet.
Do not plug a sump pump or any other device into the
Smart Outlet if the device’s ground prong has been removed or
damaged.
Do not plug a sump pump or any other device into the
Smart Outlet if the device’s power cord is cut or damaged.
Do not attempt to disassemble or open the Smart
Outlet. There are no field serviceable parts or repair options.
UNPACKING
Inspect before beginning installation. Occasionally,
products are damaged during shipping. If the outlet or any
components are damaged, contact your installer.
INSTALLATION
BEFORE INSTALLING THE SUMP PUMP
SMART OUTLET, VERIFY THAT YOUR SUMP PUMP IS IN
GOOD WORKING CONDITION! REPLACE IF NECESSARY!
1. CONNECT THE SMART OUTLET TO YOUR WI-FI
NETWORK AND INSTALL THE APP ON
YOUR DEVICE.
2. UNPLUG YOUR SUMP PUMP AND ANY OTHER CORDS
FROM THE WALL A/C OUTLET
3. PLUG THE SMART OUTLET INTO WALL A/C OUTLET
A. Remove the existing outlet cover screw and then secure
the Smart Outlet to the power outlet with the included
mounting screw. If removing the screw is not possible
or desired, make sure the outlet is firmly plugged into the
power outlet and is flush as possible with the wall.
B. The Smart Outlet is not designed to be used
with extension cords or power strips. If you have
multiple devices that require the use of a power strip, a
power strip can be connected to the lower plug outlet
on the Smart Outlet.
4. CONNECT OTHER DEVICES TO THE LOWER
STANDARD OUTLET, IF APPLICABLE.
5. INSTALL THE HIGH WATER SENSOR, CLAMPING
TO THE DISCHARGE PIPE OF YOUR SUMP PUMP.
A. Adjust the position of the mounting bracket so
the high water sensor does not interfere with the
operation of the main sump pump switch.
B. Adjust the height of the mounting bracket so the
high water sensor is activated when the water level
reaches approx. 1” higher than the “on” level of your
main sump pump.
C. If you have a secondary sump pump/battery backup
pump, make sure the high water sensor is activated
BETWEEN the “on” level of the main sump pump and
the “on” level of the secondary/backup pump.
WE HIGHLY RECOMMEND THAT YOU ALWAYS HAVE 2
WORKING SUMP PUMPS INSTALLED IN YOUR HOME,
SPECIFICALLY ONE THAT CAN OPERATE IN THE EVENT OF
A POWER OUTAGE. THE SUMP PUMP SMART
OUTLET WILL NOT OPERATE YOUR SUMP PUMP IN THE
EVENT OF A POWER OUTAGE. ALTHOUGH
WILL SEND YOU ALERTS WHEN YOUR PUMP HAS AN
ISSUE, WE RECOMMEND HAVING A BACKUP PUMP THAT
CAN TAKE OVER PUMPING DUTY UNTIL REPAIRS CAN BE
COMPLETED.
The High Water Sensor
should be mounted
1”
higher than the “on” level
of main sump pump
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
SPECIFICATIONS
WARNING
The Smart Outlet is for
residential indoor use only.
To reduce the risk of electrical shock, this device
must be properly grounded in accordance with the
National Electric Code (NEC) and all applicable
state and local codes and ordinances. The
receptacle used with the Smart Outlet
should be protected with a Ground Fault Circuit Interrupter
(GFCI).
Never remove the ground prong from the Smart
Outlet, or use an adapter that eliminates the ground prong.
Always plug your Smart Outlet directly into your wall
power outlet. Do not use an extension cord. Extension cords
could present a safety hazard if not properly sized, become
damaged or the connection falls into the sump pit.
Confirm that your Smart Outlet is completely plugged
into your wall power outlet and secured with the included
hardware. Your device should sit as flush as possible with the
wall outlet. If it seems loose, please contact an electrician.
POWER SUPPLY REQUIREMENTS
INPUT 120V, 15A, 60Hz
OUTPUT 120V, 15A, 60Hz
Wi-Fi Radio ...........................802.11 a/b/g/n 2.4 GHz
Operating Temperature ............................. 0° to 50° C
Storage Temperature ................................ 0° to 70° C
Relative Humidity ..........................................0 to 90%
