Richpower GENESIS GHD1260, Operator'S Manual

Page: 2 / 44

English
1/2" Hammer Drill
Operator’s Manual GHD1260
2
1/2" (13mm) HAMMER DRILL 6A
Operator’s Manual
Specifications:
• Model#: GHD1260
• Input: 120V AC, 60Hz, 6.0 Amp
• Chuck Capacity: 1⁄2” (13mm)
• No-Load Speed: 0-3,500 RPM and Reversible.
• Hammer Action: 0-43,500 BPM.
• Auxiliary Handle: 360 degree with depth rod
• Drilling Capacities: Steel: 1⁄2”
Masonry: 5/8”
Wood: 1-1/4”
Includes: Hammer Drill, Auxiliary Handle, Depth Rod and Chuck Key
WARnIng:
To reduce the risk of injury, user must read and understand
this operator’s manual before operating this tool. Save this Manual for future
reference.
Toll-Free Help Line: 1-888-552-8665
WARnIng:
The Operation of any power tool can result in foreign
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always wear eye protection which is marked to comply with ANSI
Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
gEnERAL SAFETY RULES
WARnIng:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WeAR yOuR
fOReSIGHT IS BeTTeR
THAN NO SIGHT
SAfeTy GLASSeS