Stage 14
Stage 15
Stage 16
9
Now apply sufficient epoxy to both sides and the bottom
of the
vertical
stabilizer. Use 30 minute epoxy to ensure
a strong bond and give yourself plenty of working time.
Insert the
vertical
stabilizer in its slot in the fuselage
and re-check the alignment. Excess adhesive should
be cleaned off with a rag or tissue before it cures.
14.1 Apply plenty of epoxy
14.2 Slide the fin in place
FITTING THE MAIN LANDING GEAR
Identify the main landing gear components shown below
- 2 main landing gear esemblies
- 2 main wheels ( 60mm x 20mm)
- 8 sheet metal screws with 4 traps
- 2 collars
15.1
Main landing gear
components
15.2 Turn over the wing to locate
the pre-drilled main landing gear
mounting holes.
15.3 Main landing gear assembly
15.4
Use 4 sheet metal screws
and 2 traps to mount the main
landing gear onto the wing
Pre-drilled main-landing
gear mounting holes
FITTING THE FUEL TANK
To assemble the fuel tank you will need the following items:
- The fuel tank and fuel stopper assembly (supplied)
- The clunk (supplied)
- About 7” (20 cm) of medium ID silicone fuel line (DUB 197
or similar)
- Cross head Phillips screw driver
