14
DEVICE USER INTERFACE
MANUAL OPERATION CONTINUED
Dosage Selection
•
Touch the energy density area to highlight it
orange. Then adjust the density by rotating the
Central Controller Dial.
•
The energy density selected, will change the
treatment time automatically. You cannot increase
the treatment time without the device also
changing the energy density level.
•
For a longer treatment time of the selected energy
density, it is recommended to apply multiple
applications of the desired dosage, at several
points. For maximum effectiveness, a minimum of
20 secs of treatment time is recommended for the
treatment area.
Treatment Ready
•
Once the parameters are set, press the start button
to activate the applicator and the indicator will turn
orange.
•
If you do not have the blue interlock connector
connected to the back of the device, the system
will show error 714. Simply plug the connector into
the back and proceed with the below directions.
•
If the treatment time equals zero, you cannot
press the Start button. A treatment time must be
populated based on the energy density.
Start Treatment
•
Place firm, comfortable pressure on the treatment
site with no tilting of applicator head, for maximal
energy.
•
Press the orange button on the applicator to begin
energy output. The orange button will change
to blue when energy output has begun. The
Treatment Time will begin counting down.
•
During treatment the laser output can be stopped
by pressing
or .
Dosage Calculator Options
To choose which dosage measurement preferred,
press the Dosage Calculator Button. There are several
options to choose from:
•
Joules only
•
J/cm
2
only
•
J/diode
•
All above options in one
(Joules, J/cm
2
and J/diode)
