Richiger R1090, Assembly Instructions Operator'S Manual Parts List, Page: 5 / 126

Limitations on Warranty
Within 8 days after delivery to or receipt of product, buyer (User Customer) shall inform seller (Service Center, representative or
dealer) in writing if product is found defective or short in any respect. Failure to so inform seller or any use by buyer of product
shall constitute conclusive evidence that seller satisfactorily performed and buyer waives any right to reject product thereafter.
The following are types of failures which are not attributable to defects in materials and/or workmanship and which are not
considered by
Richiger Maquinarias SA as part of the warranty extended hereunder. This listing is by way of example and not
intended to be exhaustive:
1) Product suffered damages attributable to accident, abuse, neglect or ignorance.
2) Product was not used in accordance with manufacturer's recommendations.
3) Product did not receive required maintenance.
4) Failure ensued after replacement of original parts without express consent of Richiger Maquinarias SA , or
modifications that in Richiger Maquinarias SA's judgement may have affected performance, safety and/or
dependability parameters.
5) Product was used in a manner or for a purpose for which it was not designed or intended to be used by the
manufacturer.
6) Incorrect mounting of external gears, pulleys, etc.
7) Stripped splines or keyways on drive shafts.
8) Damage due to deterioration during periods of storage by the purchaser prior to operation.
9) Damage of any kind from erosive or corrosive action of any gases or liquids handled by the machinery.
10) Lack of or incorrect type of hydraulic fluid, lubricant, oil and/or grease.
11) Contamination of the hydraulic fluid.
12) Operating beyond recommended maximum speeds, pressures and temperatures.
13) Repairs or disassembly by unauthorized personnel.
14) Misalignments of drive shafts, gears, sprockets and power driven elements.
15) Damage due to voltage spikes, static discharge, electrical storms, physical abuse, externally controlled device failure
and improper fusing.
Buyer inspection and acceptance
The Warranty Registration Card is to be filled in completely and signed by the buyer, and promptly returned to factory by the buyer
or by the Service center, representative or dealer. It certifies delivery and provides a ready reference to help you is securing parts
and in answering questions that you may have at a later time.
This card does not put you on a mailing list. Nor is the information on the card made available to anyone else.
We urge the return of this card so that you will receive maximum service benefits.
Cut the Warranty Registration Card on next page along the dotted lines and hand over to the Service Center, representative or
dealer who sold and delivered the machine, or mail directly to:
Richiger Maquinarias SA
Avellaneda 661,
S2322BCM Sunchales,
Province of Santa Fe,
Argentina
About the
Warranty Registration Card
12