INSTALLATION MANUAL
EN
WARRANTY
DOMUS Line guarantees the product only if powered with a
Converter supplied by us.
The warranty's general terms and conditions for this device are
available at
www.domusline.com
CONNECTING THE DEVICE TO THE POWER SUPPLY
- Connect
ATOM TW
power supply cable to one of the light
colour dynamic adjustment systems (for example MAGIC TUNE,
TOUCH TW, X-DRIVER TW etc., sold separately) (fig.7)
- For installation and operation of the light colour dynamic
adjustment system see the specific item's manual.
- Then connect the light colour dynamic adjustment system to a
safe power supply with 24Vdc stabilised voltage (sold separately)
- If more than one device must be connected to the power
supply ensure that the total sum of the power absorbed by the
devices (check the plate data shown on the product label) does
not exceed the maximum power permitted by the Converter.
- DOMUS Line guarantees the product only if powered with a
Converter supplied by us.
WARNING
- The LED module of these devices is not replaceable.
- The external flexible cable is not replaceable.
- In case of failure it must be entirely replaced the entire unit.
