Richdel 446PRi Installation And Operating Manual Download Page 2

Zone Control: Turns sprinkler valves on and off automatically in sequence.

Easy At-A-Glance Settings: Makes it simple to set watering lengths

and programs.

Dual Programming: Allows you to water your lawn and garden on

separate time schedules.

Two Separate Day Schedules: Let you water the lawn and garden on
independant days.

Multiple Watering Times: Let you water up to four times per day -
ideal for new lawns.

Variable Watering Periods: Let you water up to 99 minutes per zone.

Pause: Makes it easy to interrupt watering cycles for yard activities.

Manual Operating Mode: Lets you manually water one zone at a time.

ILLUSTRATION OF TIMER PARTS

. . . . . . . . .

PAGE 4

INSTALLING YOUR NEW TIMER 

. . . . . .

PAGE 6

STEP 1: SELECT THE LOCATION
STEP 2: MOUNT THE TIMER
STEP 3: WIRE THE VALVES
STEP 4: CONNECT THE VALVE WIRES TO THE TIMER
STEP 5: CONNECT THE TRANSFORMER
STEP 6: CONNECT THE BATTERY

PROGRAMMING THE TIMER

. . . . . . .

PAGE 8

STEP 1: SET THE CLOCK TO THE CURRENT TIME
STEP 2: SELECT THE RIGHT PROGRAM
STEP 3: SET THE TIMES OF DAY YOU WANT TO WATER

Pump Start: Automatically turns water pump or master valve on and

off. (Requires a pump start relay, Model SR-1)

TO USE YOUR NEW TIMER MOST EFFECTIVELY, PLEASE 

READ THIS

MANUAL CAREFULLY BEFORE USE AND REFER TO THE 

MANUAL IF

ANY DIFFICULTIES ARISE.

STEP 4: SET HOW LONG YOU WANT TO WATER EACH ZONE
STEP 5: SET THE DAYS YOU WANT TO WATER
SAMPLE PROGRAM

CONNECT THE PUMP START RELAY
OR MASTER VALVE

. . . . . . . . . .

PAGE 11

SPECIAL FUNCTIONS 

. . .

PAGE 12

MANUAL WATERING
SEMI-AUTOMATIC WATERING
INTERRUPTING THE WATERING CYCLE

TURNING OFF THE SYSTEM

ELECTRONIC CIRCUIT BREAKER

TROUBLE-SHOOTING GUIDE . . . . . . . . . . . . . . . .

PAGE 14

ZONE LEGEND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PAGE 15

2

3

Summary of Contents for 446PRi









Reviews: