北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd.
17
Forging ahead, create future together!
Spindle shift
Remind
：
S1-S8 respective to 1st -8th shifts of spindle speed; When the spindle turns off, the
screen shows “Fn”, letter ‘n’ is real number from 1 to 8, refers to the spindle shift number while
spindle turns off. The user only needs to input the line number. Because the control system has
been defaulted the entire spindle shifts status after that.
OUTPUT SIGNAL
：
Y5-Y8
（
Take the three-color lamp wiring as example
）
The machine and the control system will be connected with each other when the above wirings
are completed.
3.4
Commissioning of the machine and control system
1)
Turn on the power, users can manually move each axis and confirm the direction. If the
movement direction and definition direction are opposite, users can change the motor
phase sequence
（
A+
、
A-/B+
、
B-
）
or modify servo parameters (Refer to the servo drive
manual).
