product #
description
200670
WPAC Cable, Input- Joystick Charging Port
200671
WPAC Cable, Input- Battery Ring Terminals
200665
WPAC Cable, Output- DynaVox devices other
than those listed below
200666
WPAC Cable, Output- EyeMax System
200667
WPAC Cable, Output- Tango
200668
WPAC Cable, Output- DynaWrite
Troubleshooting: Light Codes
Input
Output
Cause/Indication
Solution
Solid
Green
Off
Input power connected; No
output cord detected
Plug in proper connector
cord for device
Solid
Green
Solid
Red
Momentary boot-up
Wait 2 seconds
Blinking
Green
Blinking
Green
Running Normal
- - -
Blinking
Red
Off
Input voltage too low to
power device
Charge wheelchair
batteries. Reboot WPAC*
Solid
Red
Off
Excessive Load/ Output
Short
Check output/device cord
connections. Inspect your
Dynavox device for proper
operation. Reboot WPAC*
Off
Off
No power/ Reboot needed
Check input power
connections. Reboot
WPAC*
*To reboot WPAC, disconnect and reconnect input power cord
Technical Specifications
Input Voltage: 24 volts DC
Output Voltage Range: 12-19 volts DC
Maximum Output Power: 90 watts
Related Products
