RP-II-CS8G [C]
18
Sheet 12 of 16
www.richards-mfg.com
Product Family
CS8
14
Connecting Drain Wires to CS8
For Metallic Tape/LC Shielded
A. Insert one end of a piece of wire (#14 AWG copper or larger) through one of the available grounding eyes and twist to make a small loop. Be sure not to
damage grounding eye.
B. Connect other end of wire to copper braid.
C. Ground the cable shield according to appropriate/approved practice.
For Strap/Wire Shielded Cable
A. Insert one end of a piece of wire (#14 AWG copper or larger) through one of the available grounding eyes and twist to make a small loop. Be sure not to
damage grounding eye.
B. Connect other end of wire to shield wires.
C. Ground the cable shield according to appropriate/approved practice.
Ground Eye Drain Wire
To Ground
Ground Eye Drain Wire
To Ground
Installation Complete
