Load Cell Mount Installation
© Rice Lake Weighing Systems
●
All Rights Reserved
13
11. Insert bolts into holes drilled in the foundation.
12. Install one washer and one nut on each anchor bolt. Place a driver pipe on top of the bolt and use the long punch to
seat the anchor bolts against the baseplate. Tighten anchor bolt nuts.
Figure 4-10. Seating Anchor Bolts on Baseplate
13. Attach one end of the ground strap to the upper block.
14. Insert a bolt through the wire terminal on the loose end and thread the bolt into the hole on the baseplate.
15. Tighten the bolt securely with a wrench.
Figure 4-11. Ground Strap
Ground Strap
