Installation
© Rice Lake Weighing Systems
●
All Rights Reserved
7
2.7 Pit Installation
The scale can be installed in a pit using the pit frame. Optional height-adjustment holes are available. The following site
considerations and pit frame drawings are meant as a brief overview of the principles involved in mounting a scale in a
floor-level pit and are for reference only (the pit must be installed in poured-concrete foundation according to standard
construction practices).
Figure 2-9. Pit Frame Diagram
A 1:24 slope is recommended for the pit with full grouting under the corner pads.
Figure 2-10. Installed Summit SD-1150-WP and Pit Frame Section
2.8 Dimensions
Dimensions for the Summit SD-1150-WP are provided in
Figure 2-11. Indicator Dimensions
1:24 Slope
Load Cell
Cup
Foot
Assembly
Grout
6.3"
160 mm
6.5"
160 mm
2.9"
72.4 mm
