Calibration
© Rice Lake Weighing Systems
●
All Rights Reserved
13
5.0
Calibration
Calibration of the load cells in the EZ Mounts should be performed by a service technician.
Please contact a local scale dealer for assistance with calibration.
Use certified test weights to calibrate the scale after the EZ Mount assemblies are installed
under the RoughDeck CC scale deck (
) and the junction box corner
trimming procedure has been performed (
).
Rice Lake Weighing Systems recommends using weights greater than 20% of the scale’s rated
capacity and that the weights be evenly distributed when calibration is performed.
The greater the weight used to perform calibration the more linear the scale will be.
Note
Summary of Contents for RoughDeck CC Caster Cargo
Page 22: ...RoughDeck CC 18 Visit our website www RiceLake com ...
Page 23: ......
