Operation
© Rice Lake Weighing Systems
●
All Rights Reserved
21
3.4.18 View Configured Setpoint Values
See
1. Press
.
audit
displays.
2. Press
twice.
Setpnt
displays.
3. Press
. The lowest configured setpoint number displays.
4. Press
to navigate to the desired setpoint number (1-8).
Only configured setpoint numbers display. Displayed setpoints are read only unless access is set to on.
See
for the complete setpoint menu.
5. Press
.
value
displays.
6. Press
again to view the current configured setpoint value.
7. To edit the setpoint value use the following method:
• Press
to clear the current value
• Use the numeric keypad to enter the new value and press
to accept it
• Press
to accept the new value once correct
8. Press
to return to weigh mode.
3.4.19 Reset Configuration
1. Access setup mode by pressing the setup switch (
).
Config
displays.
2. Press
.
dfltcfg
displays.
3. Press
.
no
displays.
4. Press
.
yes
displays.
5. Press
or
to reset the configuration setting.
ok
displays.
6. Press
or
.
no
displays again.
7. Press
to return to weigh mode.
Note
