Rice Lake Load Range Quick Start Manual Download Page 2

Page: 2 / 4

Load Ranger Wheel Weigh Pads

Visit our website

Pairing Ai-1 Indicator with Wheel Weigh Pads

1. Press

to turn on the Ai-1 indicator.

2. Press the upper right corner of the display, when the logo screen displays, during start-up to enter the technical setup.

Figure 2. Touch Upper Right Corner of the Display

3. Press .

4. Press .

5. Press .

Figure 3. Select Scales

6. Select the number of wheel weigh pads to be used.

7. Press .

8. Press .

9. Press .

10. Press

to start pairing process. A prompt displays. Do not press anything at this time.

11. Turn off all of the wheel weigh pads.

12. Turn on the first weigh pad only (pad assigned ID 01).

Summary of Contents for Load Range

Page 1: ...e ID settings 6 Press or to increase or decrease the selected digit and press to move between the digits to enter the pad ID number The first Pad ID number must be 01 and the remaining pad ID numbers...

Page 2: ...reen displays during start up to enter the technical setup Figure 2 Touch Upper Right Corner of the Display 3 Press 4 Press 5 Press Figure 3 Select Scales 6 Select the number of wheel weigh pads to be...

Page 3: ...on the second wheel weigh pad assigned ID 02 Figure 5 Pairing 15 Repeat this process until the serial numbers for all the wheel weigh pads in the system are displayed 16 Once the last wheel weigh pad...

Page 4: ...technical setup menu Figure 8 Technical Setup Menu 21 Press Setup changed box displays Figure 9 Setup Changed 22 Press to save settings and complete setup 23 Indicator reboots to weigh mode Initial Se...