Load Ranger Wheel Weigh Pads
Quick Start Guide
This document provides the procedures necessary to quickly setup the Load Ranger Wheel Weigh Pads and pair them with the
Ai-1 Indicator to take weight readings.
Wheel Weigh Pad Configuration
Figure 1. Wheel Weigh Pad Display
1. Press
to turn on the wheel pad.
2. Press
during start-up.
flashes and then
displays.
3. Press
three times.
displays.
4. Press
to enter the serial menu.
displays.
5. Press
to enter the ID settings.
6. Press
or
to increase or decrease the selected digit and press
to move between the digits to enter the
pad ID number.
The first Pad ID number must be 01 and the remaining pad ID numbers must increment in ascending numeric order.
Example: 01, 02, 03, etc.
7. Press
to confirm.
displays.
8. Press
to enter the Bluetooth initialization menu.
displays.
9. Press
to confirm.
displays momentarily and then
displays briefly.
displays.
10. Press
twice.
displays.
11. Press
to confirm.
briefly displays and all the changed parameters are saved.
12. Repeat steps for all wheel weigh pads in the system.
MODE
SET
DIAG
NUM
SET
NUM
DATA
Note
PN 189611
April 20, 2018
