background image

Ishida WM-Ai

Cleaning, Sanitizing and Inspection Instructions

Use the following instructions to clean, sanitize and inspect the WM-Ai.

WARNING

Discharge unit

Bottom catch 
tray (not 
shown) 

Infeed unit

Lift unit, wrap 
plates and seal 
rollers

Display  

Important

This document can be viewed and downloaded from the Rice Lake Weighing Systems website at 

www.ricelakeretail.com

Failure to heed may result in serious personal injury or death.

Always turn off the machine before cleaning or servicing.

Never touch this machine without training and authorization from your supervisor.

Guards must be in place before plugging in and turning on the machine.

Always keep your fingers, hands and clothing away from sharp or moving parts.

Failure to follow these instructions could result in damage to the equipment and void the 
warranty. 

Cleaning Points

Figure 1 calls out several parts of the WM-Ai that should be cleaned daily.

Figure 1.  WM-Ai Cleaning Points

January 27, 2016

PN 174149

Summary of Contents for Ishida WM-Ai

Page 1: ...ed may result in serious personal injury or death Always turn off the machine before cleaning or servicing Never touch this machine without training and authorization from your supervisor Guards must be in place before plugging in and turning on the machine Always keep your fingers hands and clothing away from sharp or moving parts Failure to follow these instructions could result in damage to the...

Page 2: ...he power switch is located to the left of the discharge unit On Off power switch location Off Position Figure 3 On Off Switch Location 4 Clean the lift unit discharge unit wrap plates and two sealing rollers with a damp cloth Lift unit Sealing rollers not shown but are located behind the safety cover Wrap plates Discharge unit Wrap plate Figure 4 Clean Lift Unit Wrap Plates and Seal Roller CAUTION...

Page 3: ...e and clean the infeed platter with soap and water Do not use any chemicals or bleach that will discolor the infeed platter 7 Clean the infeed area with a damp cloth Figure 6 Cleaning Infeed Platter and Infeed Area 8 Open the bottom catch tray and clean the catch tray Figure 7 Catch Tray 9 Push the infeed unit all the way inward and tighten the two knobs WM Ai Cleaning Sanitizing and Inspection In...

Page 4: ... room is cleaned remove the washdown cover and turn the machine back on This will protect the machine from condensation 5 Press Return and Enter to return to normal operation 230 W Coleman St Rice Lake WI 54868 USA U S 800 472 6703 Canada Mexico 800 321 6703 International 715 234 9171 Europe 31 0 26 472 1319 www ricelake mx www ricelake eu www ricelake co in Rice Lake Weighing Systems is an ISO 90...

Reviews: