QubeVu DimStation XL Quick Start Guide
26
USBHID
A scale which uses the USBHID protocol is connected to
QubeVu.
METTLERTOLEDO
A scale which uses the Mettler Toledo standard
protocol is connected to QubeVu.
MTSICS
A scale which uses the MTSICS (“METTLER TOLEDO
Standard Interface Command Set”) protocol is
connected to QubeVu.
NCI
A scale which uses the Weigh-Tronix/NCI protocol is
connected to QubeVu.
PENNSYLVANIA7300
The Pennsylvania 7300 scale is connected to QubeVu.
Scale comm params
This field provides an input box into which any required parameters needed to control communication
with the scale can be entered. For serial scale connections - namely METTLERTOLEDO, MTSICS, NCI &
PENNSYLAVANIA7300, other than the default values (which can be left empty), the following format is
expected:
For serial scale connections,
METTLERTOLEDO, MTSICS,
NCI & PENNSYLAVANIA7300
The following format is expected:
<BAUD RATE>,<PARITY>,<BITS>,<STOPBITS>
E.g. 9600,N,8,1
Valid values:
BAUD RATE: 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 and 115200
PARITY: N,O,E
BITS: 5,6,7,8,9
STOPBITS: 1,1.5,2
For USBHID, other than the
supported scales listed
The scale comm parameters should contain the vendor
and product ID in the follow format:
