Rice Lake iDimension 100, Manager'S Manual, Page: 25 / 57

20 iDimension 100 Managers Guide
Restore and Delete Parallax Buttons
D o not delete the parallax settings or perform a factory calibration unless instructed to do so by Rice
Lake Weighing Systems Dimensioning Team. See Section 3.3 on page 31 .
Use to restore the
Measurement Settings
tab parameters to default values, or to restore from a
previously saved backup file. When is selected, the factory restore prompt displays.
Figure 2-8. Restore Prompt
Select
OK
to restore the factory default settings
,
or select
Browse
to restore from a selected backup file. The
iDimension 100 will be restarted after the restore. If parallax settings were also selected and deleted, the cameras
must be re-calibrated before the iDimension 100 will be ready for use.
Use the Restore action from the Backup Menu to completely restore all settings in all tools. See Section 6.2 on
page 41.
must not be used unless directed by the Rice Lake Weighing Systems Dimensioning Team. See Section
3.3 on page 31 .
2.2.2 Certification Settings Tab
The
Certification Settings
tab allows the selection of pre-defined configuration profiles for Legal for Trade
applications. The certificate profile selection is dependent on jurisdiction. Contact the Rice Lake Weighing
Systems Dimensioning Team for further information.
Figure 2-9. Certification Setting Tab
Important
Note