20
4.
COUNTING OPERATION
DI-80 has the counting mode. To switch between weighing mode and counting mode, press [MODE] key.
4.1.
Unit Weight Entry
The unit weight can be determined by sampling or direct entry though numeric keys.
4.1.1. Unit weight entry by sampling
1. Go to counting mode.
[MODE]
è
0
ç
∼∼
NET
0,000
kg
0
0
u
Pcs
u
Pcs
Insuff Recom In Out Hold Mem Prog S 1 S2
2. Place 10 samples onto the
∼∼
platter and check “INSUFF”
NET
lamp is off.
0,186
kg
1 0
Pcs
u
Pcs
Insuff Recom In Out Hold Mem Prog S 1 S2
Note: If the sample quantity is not 10 pcs, enter the number of samples by numeric key.
3. Compute a unit weight.
[ Pcs ]
∼∼
NET
0,186
kg
1 8 . 6 3 9
1 0
Pcs
u
Pcs
Insuff Recom In Out Hold Mem Prog S 1 S2
Note: 1) DI-80 calculate the average unit weight by [Pcs]. To calculate the accurate unit weight, a
sufficient number of items are required.
Note: 2) Unit weight of item is displayed on the left half of the 2
nd
display.
Note: 3) Quantity is displayed on the right half of the 2
nd
display.
Note: 4) The indicator watches whether the weight of samples are enough to calculate a unit weight. If
sample pieces are not sufficient for accurate counting, the
Insufficient
lamp
is lit. If calculate
the unit weight with insufficient samples, the procedure 4 and 5 are required.
The insufficient range can be selected in internal setting mode from 0.1% or 0.2% of full scale capacity.
- Continued -
