Rice Lake 65059, Installation Manual

Page: 5 / 24

Introduction
© Rice Lake Weighing Systems
●
All Rights Reserved 1
1.0 Introduction
This manual is meant to serve only as a general guideline for installation. Each installation
is unique and should be planned by a qualified structural engineer.
Manuals are available for viewing and/or downloading from the Rice Lake
Weighing Systems website at
www.ricelake.com/manuals
Warranty information can be found on the website at www.ricelake.com/
warranties
1.1 Overview
The 50210 TA/65059 Mini-Tank Weighing Assembly provides an easy-to-use, cost-
effective, and reliable method for low capacity weighing applications. They are ideal for
installations where checking requirements are low. The flexible neoprene mounting
system allows for bolting the units directly to the mounting surface without extra plates or
load buttons. The neoprene pad also allows the vessel to expand/contract without
restriction and provides a degree of shock protection.
Applications
• Small tanks and hoppers
• Conveyor/In-motion weighing
• Small platform scales where minor shock loading may be a problem
Kit Includes
• One JB4SS NEMA Type 4X stainless steel signal trim junction box
• Three or four RL50210 cantilever beam load cells (50-250 lb models)
• Three or four RL30000 single-ended beam load cells (500 lb models)
• Three or four RL35023 alloy steel load cells (1000-2500 lb models)
• Three or four neoprene isolation/compression mounts
• 25 ft of our hostile environment EL147HE SURVIVOR® load cell cable
Standard Features
• Zinc plated, mild steel modules
• Lower weighing ranges from 50-500 lb (22.7-226.8 kg) per module
• Environmentally protected load cells
• Neoprene isolation/compression mounts allow for minor misalignment, thermal
expansion and shock absorption
• Overload stop for 500 lb (226.8 kg) modules provides durability
Options
• Stainless steel modules available in 50, 100, 150, 250 and 500 lb (22.7, 45.4, 68.0,
113.4, 226.8 kg) capacity with RL50210SS, RL50210SS and RL39123 stainless steel
load cells or Vishay Sensortronics 65023 SS load cells
• 65059 kits available with Vishay Sensortronics 60040 load cells, capacities: 50-250 lb
(22.7-113.4 kg) or 65023 load cells, capacity: 500 lb (226.8 kg)
Capacities of 1,000-2,500 can be fitted with RL35083 or RL35082 stainless steel, welded
seal, IP67 load cell. This is a non part-numbered special. Consult factory for quote
information.