Rice Lake 380 Synergy, Technical Manual

Page: 16 / 60

380 Synergy Digital Weight Indicator
10 Visit our website www.RiceLake.com
2.5 Front Plate Attachment
Once work inside of the enclosure is complete, reattach the front plate ground wire to the front plate. Position the front plate
over the enclosure and install the four front plate screws. Use the torque pattern in Figure 2-10 to prevent distorting the front
plate gasket. Torque screws to 10 in-lb (1.7 N-m).
Figure 2-10. Front Plate Torque Pattern
Torqued screws may become less tight as the gasket is compressed during the torque pattern; a second torque is
required using the same pattern and torque value.
2.6 Parts Kit Components
Part No. Description Qty.
108945 SCREW, M3 x 0.5 x 8 mm Phillips Flat Countersunk Stainless Steel Machine Screw 1
15631 CABLE TIE, 3in Nylon 4
15650 MOUNT, 3/4 in Cable Tie Mount 2
15664 GLAND, Reducing 9 mm-3/8NPT 2
192586 FRAME, Jumper Protection 1
19538 POST PLUG, 1/4 in x 1.00 Slotted Black Plastic 3
202140 SCREW, M4 x 0.7 x 10 Phillips Pan Head Zinc Finish Steel SEMS Screw with External Tooth Washer 3
28325 BAG, 2 x 3 2-Mil Write On, Ziploc Style Plastic Bag 1
30632 BAG, 5 x 8 2-Mil Ziploc Style Plastic Bag 1
42149 BUMPER, 0.50 OD x 0.281 ID Rubber Grommet 4
53075 CLAMP, Ø0.078 in Ground Cable Shield 4
67550 CLAMP, Ø0.125 in Ground Cable Shield 2
94422 LABEL, 0.40 x 5.00 Capacity Label 1
Table 2-6. Parts Kit (PN 205840) Components
2
1 4
3
Note