4
Counterpart Counting Scale Indicator
Figure 1-1. Numeric Keypad
Additional Keypad Symbols
Additional symbols can be accessed by pressing the following keys.
Table 1-3. Additional Keypad Symbols
Key
Symbol
1
<
>
-
+
*
$
/
%
"
0
*
. (period)
space
1.5
Tare Recall
When a stored tare is displayed, Net annunciators will be turned on. To display a stored tare,
1. Set up a softkey (see Softkey Setup in Section 1.7 on page 5).
2. Press the
DISPLAY TARE
softkey
.
The tare value will be displayed. If there is no tare in the system, pressing the
TARE
key will have no effect.
The Gross/Net annunciators are not lit and a value is displayed in weight display area.
1.6
Annunciator Symbols
Table 1-4. Annunciator Symbols
Annunciator
Description
0
Zero (Center of Zero)
While in gross weight display mode, this LED indicates that the current displayed weight reading is /-0.25 display
divisions of the acquired zero, or is within the center of zero band.
When in the net weight display mode, it indicates that the current net weight reading is /-0.25 display divisions of the
center of net zero. A display division is the resolution of the displayed weight value, or the smallest incremental increase or
decrease that can be displayed or printed.
G/B
Gross weight mode (or Brutto in OIML mode)
N
Net weight display mode
Indicates the level of the battery.
Scale is at standstill or within the specified motion band. Some operations, including tare functions and printing, can only be
done when the standstill symbol is shown.
