-
The hours digit starts flashing.
3. Press the
FF
/
o
FB
/
repeatedly to set the hours.
4. Press
PROGRAM
/
again to confirm.
The minutes digit starts flashing
5. Hold down
FF
/
o
FB
/
repeatedly to set the minutes.
6. Press
PROGRAM
/
again to confirm.
The minutes digit stop flashing, the clock begins to run.
7. Press
PROGRAM
/
to select between 12 and 24 hours, shown as below
Setting the timer
The unit can be used as an alarm clock, whereby the selected source (CD, TUNER, USB, SD CARD OR PHONO) to start
playback at a preset time. Make sure the clock is set before using the timer.
1. In the standby mode, press and hold
TIMER
/
on the remote over 1 second, icon "
" and message‖ TURN ON‖
start flashing. Press
TIMER
/
again on the remote to begin the ―SYSTEM POWER ON‖ timer setting.
2. Press
FF
/
or
FB
/
repeatedly to set hours.
3. Press
TIMER
/
on the remote to enter minutes setting mode.
4. Press
FF
/
or
FB
/
repeatedly to set minutes.
5. Press
TIMER
/
on the remote again to begin ―SYSTEM POWER OFF‖ timer setting.
Icon "
" and message ―TURN OFF‖ start flashing. Press
TIMER
/
on the remote again to begin timer setting.
6. Press
FF
/
or
FB
/
repeatedly to set hours.
7. Press
TIMER
/
*
on the remote to enter minutes setting mode.
8. Press
FF
/
or
FB
/
repeatedly to set minutes.
9. Press
TIMER
/
on the remote again to begin setting the source from wake up.
Default at TUNER mode. Message TUNER start flashing.
10. Press
FUNCTION
/
to select wake up source.
The unit will be waked up from last tuned station if TUNER mode is selected.
Summary of Contents for RR3000 Retro Classic
Page 4: ...CONTROL LOCATOR...
Page 5: ...CONTROL LOCATORS...
