during playback of the CD.
1 While the MP3 disc is playing, press the BAND button .
2 The CD information will start to scroll across the LCD.
3 Press the BAND button again to hide the information.
NOTE:
If the CD was recorded without any track information, UNKNOWN will be displayed when the
BAND button is pressed.
Search Play
MP3 CD’s normally contain many files. By using the search features described below, you can easily and quickly
locate albums or songs. Follow the steps below to use the search feature.
Search by File Name
1 In stop or play mode, press the FIND
to start the alphabetic and numerical search.
2 Press the or the FOLDER- buttons to select the corresponding letter or number of the track you
are searching for.
3 When the desired track is found, press the PLAY to start playing the selected track.
4 To exit search mode press the FIND button until the "* " disappears from the LCD display.
Search by Folder / Album Title
1 While the CD is stopped, press the FIND twice to start to browse the album. The search icon, ALBUM
001 and its name will be shown on the display.
2 Press th or the FOLDER buttons repeatedly to select the desired album.
3 Press the Forward Skip or Backward Skip buttons to select the desired folder/album.
NOTE:
The search feature will only work if the MP3 CD has information such as Folder, Artist and Song
titles already stored on the CD. This information is added at the time the CD is created and cannot be
added afterwards.
NOTE:
You cannot record MP3 CD’s with this unit. They must be created with a computer or other
device.
RANDOM PLAY
1
While playing a MP3 CD, press the RANDOM button on the remote control. ―RANDOM‖ will be on the LCD
display. The unit will randomly select songs from the MP3 CD and play them in any order.
2 To cancel Random Playback, press the STOP button.
Repeat playback
PROGRAMMED PLAYBACK
1
Press the PROGRAM BUTTON. ―MEMORY‖, ―P-01" will show on the display and ―MEMORY‖ will flash.
2 Press the or FOLDER
– to select an Album.
3 Press the FORWARD SKIP+ BUTTON or the BACKWARD SKIP- BUTTON to select a track.
4 Press the PROGRAM BUTTON again to store the selected track number,
5 Repeat steps 2 and 4 above to program further tracks.
6 Press the
STOP BUTTON once to confirm the Program setting, ―MEMORY‖ will stop flashing.
7 Press the PLAY/PAUSE BUTTON to start programmed playback.
8 To erase the programmed sequence, press the STOP BUTTON twice. Programmed tracks will also be
erased when the CD DOOR is opened.
NOTE:
A maximum of 70 tracks can be programmed to play in any order.
CD Recording Operation
Preparation
This unit is designed to record CD-R and CD-
RW discs bearing the identification logo ―Compact Disc
Recordable‖ or ―CD-Rewritable‖. If CD’s do not conform to this standard, they may not record properly.
Recording Records to CD
1 Load a compatible blank CD-R or CD-RW into the unit.
2 Press the FUNCTION button to set the unit to Phono mode.
3 Set the SPEED CONTROL SWITCH to the correct speed (33 1/3, 45 or 78 rpm) for the selected record.
4 Use the CUE LEVER to raise the tone arm off its rest. Move the tone arm over the record and use the cue
lever to lower it to the point you want the recording to start.
5. Adjust the sound to the required Volume level. This cannot be done once recording has started!
6
Press the CD RECORD button . ―Record‖ will show on the LCD. The CD will begin recording.