Turning off the alarm
Press the ALARM button to turn off the wake up signal of the radio alarm.
The wake up signal/radio alarm will switch itself off after approximately 2 hours automatically.
The wake up remains stored. If you leave the function switch of the radio in the AUTO position, the wake up function will
operate at the same time again the next day.
If you want to completely switch off the alarm function, slide the function switch of the radio to the OFF position.
TIMER
Your clock radio has a countdown or timer function. You can set the time between 1 minute and 1 hour and 59 minutes.
After that time has passed an uninterrupted signal will sound. The timer also works when the radio is playing.
Instruction: the timer does not allow for time measurements that are accurate to the second, because the timer will
automatically start when switched to the ON position.
Important: For timer use the alarm function should be switched off.
This means that the function switch of the radio should not be in the AUTO position.
4. Set the TIMER switch to the ON position. On the display 0:59 will appear.
5. If more than 59 minutes have to be set, press the HOUR button. Then 1:59 will appear on the display.
6. Hold down the MIN button for setting the time. The time will go backwards. Release the button as soon as the desired
time is indicated.
Instruction: If you accidentally set the wrong time, slide the TIMER switch to the OFF position for a moment and then back
to the ON position to reset the correct time.
Switching off the timer
Slide the TIMER switch to the OFF position to turn it off.
Next the actual time is displayed again.
CLEANING
When necessary, clean the radio with a dry cloth.
TECHNICAL INFORMATION
Electric supply: 230V-50Hz
Storage battery: 9V block battery (type 6LR61)
Frequency reach: UKW 87,5-108 MHz
Power deprivation: 4W
Ricatech BV
Cornusbaan 1 – 2908KB
Capelle aan den Ijssel
The Netherlands
Tél : +31 (0)10 4626733
Fax : +31 (0)10 4376027
Service & support :
Website : www.ricatech.com
