Ricardo 069858637592, User Care And Instruction Manual, Page: 5 / 8

IGNITION
Before starting, move flame intensity lever (4) to ‘‘-’’
position by sliding it to the extreme left.
::: Push down the safety lock (2) until it
clicks in place.
::: Push the ignition button (3) and
the flame will ignite instantly. If the
ignition button is not fully pushed
to the end, the safety lock will
immediately click-up and it will be
impossible to light the flame.
In this case, repeat the ignition
procedure.
NOTE: For safety reasons, the ignition button cannot be
pressed before the safety lock has been push down to
lock in place.
4