restarting.
18- Never use the tool with a damaged cable. Do not touch the damaged cable and pull the
mains plug when the cable is damaged while working.
A damaged cable increases the risk of an
electric shock.
19- Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The
following hazards may arise in connection with the tool’s construction and design:
a. Damage to lungs if an effective dust mask is not worn.
b. Damage to hearing if effective hearing protection is not worn.
c. Health defects resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
20- Noise, Vibration and Electromagnetic field information
20.1- Noise level
Wear hearing protection while operating the power tool.
The noise level has been measured in accordance with a standard test method (EN60745).
The declared noise level values are mentioned in the characteristics table.
20.2- Vibration level
The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and when it is running idle in addition to the
trigger time).
The declared vibration level values are mentioned in the characteristics table.
20.3- Electromagnetic field
Warning!
This machine produces an electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical implants. To reduce the risk of serious
or fatal injury, we recommend persons with medical implants to consult their physician and the
medical implant manufacturer before operating this machine
21- Working with the tool
Only well-instructed adults should operate the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use
of the product by a person responsible for their safety
Keep your second hand on the auxiliary housing.
Handling the tool with both hands ensures they cannot be cut by the blade.
Position your body on one or the other side of the tool, but not in the alignment of the blade or
the cutting axis.
Hold the tool firmly to prevent any loss of control.
Do not try to remove debris material when the blade is still moving.
The retractable protective cover cannot protect you from the blade on the underside of the work
area. Do not try to remove the material when the cutting blade moves.
Always check the proper closure of the protective guard before each use. Do not operate the tool
if guard does not move freely and does not close properly.
Never hold or tie the guard in open position.