7. Operation Procedures
Changing the coin tube holder
Changing the coin bag
Unscrew knob
releasing metal
ring
Attach coin catcher
tube holder
(replace knob to
lock into place)
Step 1: Turn on the power switch, the display will show 0 and the ADD indicator on the right side
of the display will be on. The machine is in accumulation counting mode and ready to start
counting.
Step 2: Set coin diameter adjusting knob to the desired denomination according to the coin
diameter.
Step 3: Set coin thickness adjusting knob to the desired denomination according to the coin
thickness.
Step 4: Place a coin bag, or a carton, on the coin outlet.
Step 5: Put the coins into the Hopper and press the STOP/START key to start the counting. The
machine will stop when the count number comes up to the batch number, or after the machine
completes counting all the coins in the hopper.
Step 6: If the counting should stop in halfway, press the STOP/START key, the counting will stop;
with the key pressed again, the machine will restart, and the previous count number is retained
and new counting will be added to it.
Step 7: When counting is completed, if you want to clear the display, press the CLR key. The
count display will reset to "0" or the last count number in accumulation mode, press the CLR key
again, the count display will reset to "0".
Attach coin
wrapper stopper.
Hooks on.
Shotgun style wrapper
works best
Drop coin director
down into
tube holder.
This directs coins
into wrappers
Unscrew knob
releasing metal
ring
Pull bag up
around metal ring
Bring ring back down and
replace knob, then fold bag
top down to cover metal ring
Copyright © 2005,2006 Scales and More. All rights reserved.
