BC-40 User Manual V1.2
32
4
）
After pulling out the U-disk at the end of each collection, if you want to collect again, you must shut
down the machine, insert the U-disk first, then turn on the machine, and collect images when entering the
collection mode.
5
）
If the screen displays following message after choose data collection mode, it means the U disk is not
inserted into the machine or it can not be recognized by machine. Please turn off the machine and insert the
U disk first then turn on the machine again, or replace a new U disk. Once the U disk is recognized by
machine, the red message will disappear.
Figure 60
8.3.2 Full Collection Mode
8.3.2.1 Banknote Sorting
Under the full collection interface, the customer needs to operate as follows, taking USD as an
example:
1) Please sort out the banknotes for which images are to be collected and put them together in the same
denomination. (Example: 100 yuan for a stack, 10 yuan for a stack, and 1 yuan for a stack), as shown in
Figure 61 below.
Figure 61
2) The banknotes of the same denomination are sorted into the same face and direction, and the four faces
of A, B, C and D are used to distinguish them, as shown in Figure 62-A, 62-B, 62-C and 62-D below:
Summary of Contents for BC-40
Page 1: ......
