PAGE 1 - 2
FROM
PAGE 2 - 2
8: Operating sleeping position
5: Screwing of the cushion
1 – Screw the triangular plate on the opposite side of
the handle (torque N.m 24 maximum)
2 – Press the release lever and hold it in position
3 – Lower the hinge onto the bolts of the frame
4 – Release the lever
5 – Screw the second hinge on handle side
24 N.m tightening torque maximum)
1
2
3
4
5
6: Rotation of the cushion
1 – Press the release lever and hold it in position
2 – Rotate the seat cushion to the required position
3 – Release the lever
1
3
2
7: Assembly of the rear back
(only for model ALTAIR 3 P)
Proceed in the same way for the Assembly of the rear
backrest (rotation of the handle in the opposite direction
of the seat cushion one)
Day / driving
position :