40
SPARK
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
code ACG7059
LATERAL SUPPORT
code ACG7042
SPARK ANTENNA 433
code ACG5452
MECHANICAL BOLT
For 2-leaf gates to latch closed gate to the ground.
code ACG5000
ELECTRIC LOCK
Horizontal lock - right external view - 12Vac
code ACG8660
Horizontal lock - left external view - 12Vac
code ACG8670
Vertical lock - 12Vac
code ACG8650
FIT SLIM
PHOTOCELLS
for the wall-installation
code ACG8032
PAIR OF COLUMNS FOR FIT SLIM
code ACG8065
FIT SLIM photocells have synchronism function in AC current and ranges of 20 m.
You can fit many couples close together thanks to the synchronising circuit.
Add the
SYNCRO TRANSMITTER TX SLIM SYNCRO
code ACG8029 for more than 2
photocells couples (up to 4).
G
B
TOUCH
MECHANICAL SAFETY STRIP L = 2 m
CERTIFIED EN 13849-2 (2008) CATEGORY 3
code ACG3015
VERTIGO
PHOTOCELLS SUBSTITUTING THE SAFETY STRIP
CERTIFIED EN 12978 - EN 13849-2 PL “c” CAT 2
VERTIGO 8
cod. ACG8044
VERTIGO 10
cod. ACG8045
VERTIGO WIRELESS 8 cod. ACG8061
VERTIGO WIRELESS 10 cod. ACG8062
Applicable vertically and horizontally to sliding and swing
gates.
