1. Enter Program Mode
﹡
﹡
﹡
﹡
(Master Code) #
2. Control LED
OR
2. Control Sounds
OFF =
6 1 #
OFF =
6 3 #
ON =
6 2 #
ON =
6 4 #
(Factory defaults are ON)
3. Exit
﹡
﹡
﹡
﹡
Others
Users Operation:
Open the door: Read the valiad user card, the door will open.
Remove Alarm: Read valid user card, or Input Master code #
Reset to Factory Default:
To reset to factory default, power off, press Exit door button , hold it and power on, release it after
hear two beeps, the LED light will turn into yellow, after 10 seconds, it will turn into red after one beep,
mean reset to factory default successfully.
Remarks: Reset to factory default, the user’s information is still retained.
Erase all Cards
This will delete ALL User data.
1, Enter Program Mode by press: *(Master Code) #.
2, Press 2 and Master code again
3, Exit: *
All configuration data is retained.
S
ound and Light indication
Operation Status
LED
Buzzer
Stand by
Red light bright
-
Enter into programming mode
Red light shines
One beep
In the programming mode
Yellow light bright
One beep
Operation error
-
Three beeps
Exit from the programming mode
Red light bright
One beep
Open lock
Green light bright
One beep
Alarm
Red light Shines quickly
Beeps
Set Audible and Visual Response
Programming Step
Keystroke Combination
