www.rhydolabz.com
We bring the world to you..
PROGRAMMING STEPS
The PIC18F4580 Demo Kit is preloaded with Boot loader firmware. This allows the user to program
the microcontroller without using separate programmer.
1. Setup Rhydo Boot Loader.
2. Select COM port and set Baud rate as 115200 bps.
3. Browse your Hex files.
4. Ensure RS-232 connection and power connection.
5. Click the Write Flash button.
6. Reset PIC using the Reset button while Boot loader searches for PIC.
Note:
The microcontroller is preloaded with boot-loader software. Programming with other
devices/programmers or removing the microcontroller from the development board could damage the
boot-loader. In this case, the company won’t be liable for the damages caused and no
replacement/refunding/reloading is entertained.
